The remote session was disconnected because there are no Remote Desktop License Servers available to provide a license

The following typically resolves the error: The remote session was disconnected because there are no Remote Desktop License Servers available to provide a license while trying to connect to a server from a remote computer.

1. If you have RDS deployment, did you create a session collection and make your RDSH server part of the collection?

2. In Server Manager -- RDS -- Overview -- Deployment Overview -- Tasks -- Edit Deployment Properties -- RD Licensing tab, did you set the Licensing mode and add the FQDN of your RD Licensing server?

3. If this is a standalone RDSH server (i.e. you didn't create an RDS deployment via Add roles and features), did you configure the licensing mode and licensing server name using group policy?  For example, you could use gpedit.msc and configure the below settings:

Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing

Use the specified Remote Desktop license server     Enabled

Set the Remote Desktop licensing mode     Enabled

4.  Restart the Remote Desktop services by typing Services.msc from the "Run" command.

Windows 7 and Server 2008 R2 updates KB4480970 and KB4480960 causing network issues

The issue is triggered only if the user attempting to make the connection is an administrator on the machine that hosts the Share. If the user is "just" a user on the device that hosts the share, the connection should be fine.

A workaround has been published to address the issue. It modifies the Windows Registry and should be run on the system that hosts the share. Note that you need to run from an elevated command prompt.

• reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\system /v LocalAccountTokenFilterPolicy /t REG_DWORD /d 1 /f
• Reboot the PC.

OR:

Download the KB update from here:

https://support.microsoft.com/en-au/help/971033/description-of-the-update-for-windows-activation-technologies

Windows 7 Update files are filling up my hard drive.

Windows 7 Update files are filling up my hard drive.

Step 1. Stop the Windows Modules Installer service. To do this, Click Windows Key + R to bring up the Windows Search Box.  Type in Services.msc and hit Enter.

You will see the Local Services list.

Step 2. Scroll down to the Windows Modules Installer service and right-click on it and click Stop.

Step 3. Scroll down to the Windows Update service and right-click on it and click Stop.

Step 4. Use File Explorer to go to C:\Windows\Logs\CBS. (If Windows is installed on a different hard drive, you have to go to that drive.)

Step 5. Move or rename all of the files in that folder.

Step 6. For good measure, delete all the "cab*" files in your Windows Temp folder, typically C:\Windows\Temp. Makecab won't ever delete them, so you get to.

Step 7. Reboot.

Corrupt Local Windows 7 User Profile when computer attached to server domain

Step 1. To fix the user account profile, click Start and type regedit into the search box and press Enter.

Step 2. Registry Editor will open and you need to navigate to the following key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

Step 3. Click each S-1-5 folder and double-click the ProfileImagePath entry to find out which user account profile it relates to. (If the folder name ends with .bak or .ba follow Microsoft's instructions to rename them.)

Step 4. Once you have located the folder for the corrupt user profile (and it doesn’t have a .bak ending), double-click RefCount and change the Value data to 0 and click Ok.

Step 5. Next double click on "State" and make sure the Value data is also 0 and click Ok.

Step 6. Close regedit & restart your computer. You should now be able to log into your account.

Clear and reset Windows Pending Reboot caused by updates.

To clear the pending reboot, do the following:
*Be sure to backup your registry before attempting this fix.

1. Click Start, click Run, type “regedit” and click OK
2. Navigate to HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/WindowsUpdate/Auto Update
3. Right-click the key (folder) “RebootRequired” and click Delete

Additionally, you may have to restart the Automatic Updates server. To restart Automatic Updates, do the following:

1. Click Start, click Run, type “services.msc” and click OK
2. Right click on Automatic Updates and click “Restart“

Avaya Partner ACS Disable Auto Attendant and Use Ext 10 to answer General Mailbox.

QUESTION: 
All we need for it to do is ring a certain amount of times (lets say 5) and for it to go to a general mailbox/voice mail. Right now it rings 5 times, goes to the automated attendant, and auto-transfers to extension 10.

How do I get the phone system to skip the automated attendant and go straight to extension 10 and/or turn the auto-attendant off so all we have is the voice mail?




ANSWER:
You will do your programming from Ext. 10 or 11. Feature 00, then press the Left Intercom button Twice to get into System Programming.

First UNassign the lines from being answered by the Automated Attendant

Dial #206-7, then dial the line. (For Line 1, dial 01. For Line 2, dial 02. etc)
The bottom line of the display should say "1 Assigned", so press 2 and it will change to "2 Not Assigned". Do this for each line.

Now assign Ext. 10 to cover the calls.

Dial #208, then the line number, and then 10. Do this for each line (01, 02, 03, etc.)

Make sure that Ext. 10 has Automatic Voice Mail Coverage turned on. Dial #310-10, and make sure the 2nd line says "1 Assigned". If it says "2 Not Assigned", press 1 to change it.

Set the number of rings before the mailbox picks up by dialing #321-10, and then the number of rings, up to 7.

Finally, be sure that the lines actually ring on that extension, so press the Right Hand Intercom button Once, dial 10, make sure that each line is lit up SOLID green. If they are flashing or fluttering, press each line to cycle through the settings (Immediate, Delayed, No Ring) until they are all solid.

Press Feature and dial 00 to exit.

Record an appropriate outgoing message, and you should be good to go. 

Pressing the DND (Do Not Disturb) button will make the mailbox pick up Immediately, if you want to use that mode at night.

The trust relationship between this workstation and the primary domain failed - Windows XP Pro

The trust relationship between this workstation and the primary domain failed.  Windows XP Professional

1. Unplug the network cable from computer, so it logs on with (the same) cached credentials.  I logged on as the Local Administrator.

2. Under System Properties, under Computer Name, go to Network ID.

3. Ran the network wizard with the network cable still unplugged.

4. Right after you type in your credentials under the User Account and Domain Information screen, I plugged the network cable back in.

5. It asked me to verify again with the Administrative account to my domain, it took it!

6. Reboot and test.

SOLVED! Problem printing to a Local Network printer from a Remote Desktop (RDP or Terminal Service) session.

If you cannot get a local network printer to print while connected to RDP (Terminal Services) session, do the following:

1. Share your local network printer.  Example share name HP6600.

2. Add a dummy local printer on port LPT2: with the same drivers for the network printer.  Example HP Officejet 6600.

3. Then open a command prompt and run this script "net use LPT2 \\localhost\HP6600 /persistent:yes"

PROBLEM SOLVED!

Error: Spooler subsystem app stopped working

If you have ever gotten the message "spooler subsystem app stopped working..." and you can no longer print, you know what a pain it can be.  Follow the steps below which should resolve your issue.

Option 1:
1. Go to Programs and Features in Control panel > click Turn Windows features on or off
2. click + sign of Print services
3. Select LPD and LPR. Remove Internet Printing Client. > restart your PC to ensure there is no error of spooler service.
4. Add your printer driver again.


Option 2:
1. Rename the file Filename.dll in C:\Windows\System32\Spool\Drivers\w32x86\3 to Filename.old.  Reboot computer and reinstall drivers.


Option 3:
1. Try removing the printer jobs from the C:/windows/system32/spool/printer folder.
2. Restart the PC and test.


Try 1 or all 3 options.  Good Luck!

Outlook Error Message: "This operation has been cancelled due to restrictions in effect..."

THIS ISSUE IS COMMON AFTER UNINSTALLING GOOGLE CHROME OR MOZILLA FIREFOX.

If you received this error after uninstalling any application that takes over the HTML open command (including, but not limited to, Chrome & Firefox browsers) you may also need to change the HTM/HTML association in the registry.

*It is recommended that you backup your registry before following the steps below:

1. Start, click Run, type Regedit in the Open box, and then click OK.
2. Browse to HKEY_CURRENT_USER\Software\Classes\.html
3. Right click the value for the .html key and select Modify…
4. Change the value from "ChromeHTML" to "htmlfile" (or from FireFoxHTML to htmlfile)

Cannon uninstall device from device manager.

This solution is based on how to deal with a Linksys Wireless USB Network Adapter WUSB54G and on Windows XP as an example.

1. Make sure the device is unplugged from the computer.
2. Boot into Windows. Whether you choose the normal bootup or Safe Mode is up to you. Both works.
3. Open up Command Prompt.
4. Enter “SET DEVMGR_SHOW_NONPRESENT_DEVICES=1“.
5. Now enter “devmgmt.msc” to access Device Manager. Leave the Command Prompt window open.
6. Go to View > Show hidden devices.
7. For my WUSB54G it belongs to the “Network adapters” category. Expand it.
8. You see some of the entries are faded. Those are “ghosted” or non-present devices.For me the “Linksys Wireless-G USB Network Adapter – Packet Scheduler Miniport” entry is “ghosted” and “Linksys Wireless-G USB Network Adapter #2” and “Linksys Wireless-G USB Network Adapter #2 – Packet Scheduler Miniport” are non-present devices (not plugged in).
9. Open up Registry Editor by going to Start > Run then enter “regedit“. Alternatively you can also type “regedit” in the Command Prompt window that you have left open.
10. I am dealing with the “Network adapters” category so I go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002bE10318}. You will see that on the right panel “Network adapters” is mentioned.
11. The keys are in numbers but on the right panel the device name will be mentioned.The 3 devices that I have mentioned belongs to 0010, 0011 and 0012 respectively. How do I know? Check the right panel of the Registry Editor.
12. I then proceed on to delete the keys 0010, 0011 and 0012.
13. You will see that you are now able to uninstall the device in Device Manager. Go back to Device Manager and uninstall the devices.
14. Most important step! Delete the driver file in question. Mine was the rt2500usb.sys which was located in C:\WINDOWS\system32\drivers (by default).What happens if you don’t follow this step?I did all of the following except for deletion of the driver file. I restarted and plugged in my device, which is the WUSB54G. Upon login Windows immediately detected the device and with some unknown methods installed the device back using the same driver file (which gives me a BSoD when I first installed the device).What happened next? BSoD.
15. Restart your computer.
16. Plug in your device. Windows will detect it again. For me it assigned it the name “Linksys Wireless-G USB Network Adapter” instead of “Linksys Wireless-G USB Network Adapter #2″, which is what I want.
17. Since the SYS driver file is deleted Windows will prompt for it. Simply point it to the location of the new version of the driver.

Office Outlook 2003, 2007, & 2010 NK2 File Location

For Outlook 2003/2007 with Windows 2000, Windows XP, or Windows Server 2003:
The location of the nk2 file is C:\Documents and Settings\[User Profile]\Application Data\Microsoft\Outlook
The name of the NK2 file is identical to the Outlook profile name, with .nk2 extension.

For Outlook 2003/2007 with Windows Vista, Windows 7, or Windows server 2008:
The location of the nk2 file is C:\Users\[User Profile]\AppData\Roaming\Microsoft\Outlook
The name of the NK2 file is identical to the Outlook profile name, with .nk2 extension.

For Outlook 2010 with Windows Vista, Windows 7, or Windows server 2008:
The nk2 file is located in C:\Users\[User Profile]\AppData\Local\Microsoft\Outlook\RoamCache
The name of the NK2 file is in the following format: Stream_Autocomplete_X_AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.dat The X is the file index (usually 0) and AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA is a random 16-byte key in hexadecimal format.

For Outlook 2010 with Windows XP:
The nk2 file is located in C:\Documents and Settings\[User Profile]\Local Settings\Application Data\Microsoft\Outlook\RoamCache
The name of the NK2 file is in the following format: Stream_Autocomplete_X_AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.dat The X is the file index (usually 0) and AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA is a random 16-byte key in hexadecimal format.

SOLVED Issue: "you have been logged on with a temporary profile".

STEP ONE:

Log On to the Computer as an Administrator

You must be logged on to an administrator account using either step 1 or 2 below before you can move on to do the STEP TWO section below.

1. To Log on to another Administrator account
NOTE: If you do not have another Administrator account, then proceed to step 2.

A) Go to the STEP TWO section below.

OR

2. To Boot into Safe Mode for the built-in Administrator account
NOTE: You may not need to enable the built-in Administrator account. If this was the only normal administrator account you had, then Safe Mode should automatically boot into the built-in Administrator account.

Error! Cannot read or display file.Tip

If you cannot boot into Windows and do not have a Windows installation DVD, then you can create and use the boot disc below to boot into Safe Mode with instead.

Windows 7: (Option Two at link)
Error! Hyperlink reference not valid.

Vista: (Option One at link)
Error! Hyperlink reference not valid.

A) Boot into Error! Hyperlink reference not valid. (in Vista) or Error! Hyperlink reference not valid. (in Windows 7).

B) If Safe Mode did not boot into the built-in Administrator
account, then enable the Error! Hyperlink reference not valid. account. If it did , then go to step 2C.

C) Log off in Safe Mode, and then log on to the built-in Administrator account to logon with that account in Safe Mode.

D) Go to the STEP TWO section below.

STEP TWO

Delete the User Account Profile's SID Key

1. Backup anything that you do not want to lose in this user account's C:\Users\(user-name) profile folder, if the profile folder still exists, to another location, then delete the (user-name) profile folder.

2. Open the Start menu.

3. In the Start Menu search box, type regedit and press Enter.

4. If prompted by UAC, then click on Continue (Vista) or Yes (Windows 7).

5. In regedit, go to: (See screenshot below step 7)

Code:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

6. In the left pane, click on one of the S-1-5..... folders (SID key) with the long number. (See screenshot below step 7)
NOTE: It should have .bak at the end of it.

A) In the right pane, look at the ProfileImagePath to see if this is the same user account that you deleted in step 1 above.

B) Repeat step 6 until you find the one that you deleted in step 1 above.

7. To Backup the Registry SID Key
WARNING: You should backup this SID key to be safe in case you delete the wrong one in step 8 below.

A) Right click on the SID key from step 6, and click on Export.

B) Type in a name and save the REG file to a safe location.
NOTE: This is your backup. To Restore the Backup, right click on the REG backup file and click on Merge.

C) Continue on to step 8.

Error! Hyperlink reference not valid.Error! Cannot read or display file.Error! Hyperlink reference not valid.

8. Right click on the SID key, from step 6 with bak at the end, and click on Delete. (see screenshot above)

9. Click on Yes to confirm deletion. (See screenshot below)

Error! Hyperlink reference not valid.Error! Cannot read or display file.Error! Hyperlink reference not valid.

10. If there is another SID key with the exact same long number from step 6 for this user account without bak at the end, repeat step 7 first, then right click on this same SID key, and click on Delete. (see screenshot below step 7)

11. Click on Yes to confirm deletion. (See screenshot below step 9)

12. Close regedit.

13. Log off and log on.

Error! Cannot read or display file.Note

After you log on to the computer, the profile folder you are having problems with is re-created. If not, then try a Error! Hyperlink reference not valid. using a restore point dated before you got this error. If this still does not help, then you will need to Error! Hyperlink reference not valid. and restore the user folder files from the backup created at step 1.

SOLVED! Repair Master Boot Record (MBR) Windows 7

Question:

My computer will no longer boot into Windows.  All I see is a black screen with an underscore in the upper left corner of my screen.  How can I fix this?

Answer:

1. Boot off of your Windows 7 installation CD.

2. Choose "Repair your computer" and then select "Command Prompt"

3. After selecting repair>cmd prompt, enter:

   BootRec.exe /fixmbr, then hit enter.
4. Then enter Bootrec.exe /FixBoot. Then hit enter.  This writes a boot sector onto the system partition to start Windows.

Optional Commands:
/ScanOs. Scans all disks for Windows installations and displays them to you. 
/RebuildBcd. Scans all disks for Windows installations and prompts you to pick the ones you want to add to the BCD.

Allow SonicWall NetExtender Clients Internet Access While Connected

This article shows how to allow SonicWall NetExtender Client to access the Internet

while remotely connected.




1. Log into your Sonicwall, and expand “Network”


2. Click on “Interfaces” and then click on the Configure link for your WAN connection.


3. Make sure the box that says “User Login: Https” has a check mark, and then click “OK”


4. Expand “SSL VPN” on the left, and then click “Server Settings”


5. Click the red dot next to “WAN” and wait for it to turn green.


6. Click “Client Settings” on the left, and then configure an IP address range for your SSL VPN Guests, also configure the User Domain, and DNS servers.


7. Click “Client Routes” on the left pane, Enable “Tunnel All Mode”, this is done to ensure all traffic sent by the client appears to originates from the main office, and not the client’s home router.


8. Now let’s create a user and grant them access to the appropriate networks during an VPN connection.






10. Expand “Users” on the left, and then click on “Local Users”.


11. click “Add User…”


12. On the “Settings” tab, give the user a username and password.


13. On the “Groups” tab, Add the user to “Trusted Users”, “Everyone”, and “SSLVPN Services”. Click OK.


14. Click “Local Groups” on the left.


15. Click on the “Configure” button for the group “Trusted Users”


16. Click on the “VPN Access” tab, add “LAN Subnets” and “WAN RemoteAccess Networks” to the list. Click OK.
 
 
That's it, now your remotely connected clients can access the internal network and have the ability to browse the web.

SOLVED! Your system administrator does not allow the use of saved credentials to log on to the remote computer RDP terminal server because its identity is not fully verified. Please enter new credentials.

In order to use saved RDP or Terminal Server credentials you need to do the following:


1. On the local machine, Open Group Policy Editor via Run -> gpedit.msc
2. Navigate to Local Computer Policy>Computer Configuration>Administrative Templates>System>Credentials Delegation


3.Open Setting Allow Delegating Saved Credentials with NTLM-only Server Authentication, set it to Enabled click on button Show... and in Show Contents window add Value TERMSRV/*. Close the windows by pressing OK.

*Repeat step 3 on the following settings:
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Default Credentials with NTLM-only Server Authentication

4. Open comman prompt and enter gpupdate /force command to update your policy.


IF YOU ARE RUNNING A DOMAIN SERVER AND WISH TO PUSH THESE SETTINGS USING GROUP POLICY FOR THE STATIONS LOGGING ONTO THE DOMAIN DO THE FOLLOWING:
 
1. Run gpmc.msc
2. Right-Click on Default Domain Policy and click Edit
3. Navigate to Local Computer Policy>Computer Configuration>Administrative Templates>System>Credentials Delegation


4.Open Setting Allow Delegating Saved Credentials with NTLM-only Server Authentication, set it to Enabled click on button Show... and in Show Contents window add Value TERMSRV/*. Close the windows by pressing OK.


*Repeat step 4 on the following settings:


Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Default Credentials with NTLM-only Server Authentication
5. Open comman prompt and enter gpupdate /force command to update your policy.

Solved: Map Network Drive Windows 7 to Server

Open up GPEdit for the GPO in question; click the ‘User Configuration’ folder, then click the ‘Preferences’ folder. You can see all of the user-relevant options you can set in Preferences. Find Drive Maps under ‘Windows Settings.’

1. Click Start, then type GPEdit.msc
2. Locate "User Configuration"
3. Locate "Preferences"
4. Create Drive Mappings.

Here is the link where I found this method:
http://blogs.technet.com/b/grouppolicy/archive/2009/02/11/gp-preferences-will-reduce-logon-scripts-mapping-drives.aspx

SOLVED! - Adobe Acrobat Reader causes Print Spooler to stop and deletes all printers.

To solve this, first make sure the Print Spooler is running.  To do this follow these steps:
1. Click the "Start" Button and enter services.msc and hit enter.
2. Scroll down to Print Spooler and right-click it.  Choose Start.


Next, open a PDF document and follow these steps:
1. Choose "File" from the menu.
2. Choose "Print" from the options.
3. From the Print Properties window, click the "Advanced" button.
3. Place a check in the box for "Print as Image".
4. Click OK and close out of the Advanced properties.
5. Print your file.


That's it, your problem should be resolved!

SOLVED! - How to change Windows remote desktop port number

How to change Windows remote desktop port number.  This will also allow you to have multiple computers hosting RDP (Remote Desktop - Terminal Services) within your network.  Each computer will have to have a unique port number.  5 Simple Steps Below:


1. Press "Start" button and type "regedit":

2. Expand the registry folders to:
HKEY_LOCAL_MACHINE --> System --> CurrentControlSet --> Control -->Terminal Server --> WinStations --> RDP-Tcp

3. Locate "Port number" entry and double-click on it. In opened window choose "Decimal" and change "Value data" field to your desired port number.

4. Click OK.

5. *Important - Make sure that new port is opened in firewall.

SOLVED! - Copy (Import) NK2 file from Outlook 2003 or 2007 to Outlook 2010

Follow These Steps to copy (import) your NK2 Cache to Outlook 2010:

1. Verify the name of the Profile in the Control Panel. It was 'Outlook'
    a. Click Start, and then click Control Panel.
    b. Double-click Mail.
    c. In the Mail Setup dialog box, click Show Profiles. 

2. Copy the OUTLOOK.NK2 file to the "users\\AppData\Roaming\Microsoft\Outlook" folder.
   a. Copy from Windows XP location:         Drive:\Documents and Settings\Username\Application Data\Microsoft\Outlook

    b. Copy from Windows Vista and later versions location:        Drive:\Users\Username\AppData\Roaming\Microsoft\Outlook

3. Open Outlook by using this command: "OUTLOOK.EXE /importnk2".

*When you exit outlook, the NK2 file is renamed, OUTLOOK.NK2.OLD.

4. Test your Email Address Cache in Outlook by creating a new mail message.

THAT'S IT -

SOLVED! How to grant 'Allow log on through Terminal Services Right'

1. Run gpedit.msc (local group policy editor)
2. Expand Local Computer Policy –> Computer Configuration –> Windows Settings –> Security Settings –> Local Policies –> User Rights Management
3. Look for the setting called Allow log on through Remote Desktop Services
4. Double click this policy to open it.
5. Add the user/group you would like to have remote access to the box.

That's it, now you can login remotely.

Turn off or disable Password Complexity requirements and settings - SOLVED

To turn password complexity off in Windows 2008 Server follow these steps:


1. run gpmc.msc (Group Policy Management)
2. Expand your Domain
3. Go to "Group Policy Objects" and select "Default Domain Policy"


4. Choose "Settings" tab


5. Expand:
Computer Configurations
Policies
Windows Settings
Security Settings
Account Policies
Password Policy


5.1 Drill down to
-> Computer Configuration
  -> Policies>
    -> Windows Settings>
      -> Security Settings>
         -> Password Policy


6. Disable Password Complexity.


7. Run: gpupdate /Force


This is the only way to disable Password Complexity in Server 2008. The local Security Policy can not be used for changing Password Complexity in Server 2008.

SOLVED! - How to Enable or Disable Right-Click feature in Windows XP

These steps will show you how to re-enable right clicking for your desktop in Windows XP.



1. Open up the "run" command (if it is not available, use 'Windows Key' + R)


2. Type in "regedit" without quotes, then hit enter.


3. Navigate to: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]


4. Look for the value name "NoViewContextMenu" (if no such value exists, then just go ahead and create it)


5. Make sure it is REG_DWORD


6. Enter a 1 to disable right-clicking and 0 to enable right-clicking.


7. Restart the computer after the change and text.

My Desktop background is missing after a virus on Windows XP

If your Desktop background is missing and cannot be changed on Windows XP, do the following:


Do this to re-enable background:


1. Open up registry editor (Start > Run > Regedit)
2. Locate: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ActiveDesktop]
"NoHTMLWallPaper"=dword:00000001

3. Change the value to 0

Virus has set my files in drives to Hidden. Step to restore all hidden files.

Steps to restore hidden files, drives, and folders.  Also will restore hidden Start Menu items and desktop icons.

STEP1:

1. Click Start > Run > type CMD2. Dos will open type cd\3. Now type the drive letter in which you want to Unhide the files lets suppose in this example it is C: this will open the C: drive4. If you want to see all of the hidden folders and files,  type C:\>dir/ah5. Next type attrib *. -h -s /s /d

STEP 2 - Option for unhiding individual folders

1. Click Start > Run > type CMD
2. Type cd\  at the DOS prompt3. Now type the drive letter in which you want to Unhide the files lets suppose in this example it is C: this will open the C: drive
4. If you want to see all hidden files and folders type C:\>dir/ah (*you will now see the files/folders with hidden attributes )5. Type “attrib [folder-name] -r -a -s -h”.

Note: If plan on unhiding individual files, you should type the entire filename plus the extension (ie: attrib budget.doc -r -a -s -h)


Another quicker and more automated method would be to use this command where C is the Drive Letter:
attrib -s -h -r C:/*.* /s /d


THIS CAN BE CAUSED BY A ROGUE VIRUS.  A LINK BELOW EXPLAINS THE FULL PROCESS OF REMOVING THIS VIRUS:
http://www.bleepingcomputer.com/virus-removal/remove-windows-recovery

No messages are showing up in my Inbox or other folders in Windows Mail

You can see that there are messages in your Windows Mail inbox, deleted items folder, etc but they are not showing up in the read panes.  I have used this tool  and it worked great for me.  The tool repairs your Windows Mail data file.  If you are missing some folders like Sent Items, etc, this should give you those back as well.

Here is the link to the tool.
http://www.oehelp.com/WMUtil/

Tips: How to Enable Hidden Administrator Account in Windows 7

1. From the Command Prompt


You need to run Command Prompt as the administrator. You can do that by right-clicking on Command Prompt in the program list and choose "Run as administrator".  The Command Prompt icon is located un  "All Programs" > "Accessories".

Next, you only need to enter the simple command below to activate the Administrator Account
net user administrator /active:yes

You can also specify your password for this particular account by using the following command
Net user administrator password

That's it, your all finished.  In order to deactivate the Administrator Account, you can use the command below
net user administrator /active:no

Gmail (Google Mail) not showing pictures when forwarding an email message.

1. In the Internet Explorer, choose Tools, click on Compatability View Settings. Click add for google.com, then close. That should do it.

Automatically delete duplicate songs in itunes

This next method uses VBScript and will only work for Windows users. If you are unfamiliar with VBScript, it's a coding language that allows you to make your own custom program for your PC. To run the duplicate song killer VBScript below, just follow these steps:

• Click here to open the VBScript in a new browser window.
• Copy and paste the script into a new Notepad document (Start > All Programs > Accessories > Notepad).
• Edit line #2 and replace "DaCeige" with your username.DaCeige is the methodshop.com reader who wrote the script.
  • C:\Users\DaCeige\Music\iTunes\iTunes Music
• Save the Notepad file using a file name like "DupKiller.vbs" Notepad will automatically try to add ".txt" to your text files. You MUST add the file extension ".vbs" to your file.
• Double click on the file called "DupKiller.vbs" on your desktop. This will make a shortcut to the script.
• That's it. Just double click on the shortcut for now on to run the script.
• You may see a warning window from Norton AntiVirus when trying to run this script. Just select the option that allows this script to run. But always be cautious before running a VBScript. Never run a VBScript without inspecting it first. Many times people will try to hide viruses in VBScripts.

Here's the script below if you want to inspect it. Don't copy and paste this scriptimmediatelybelow. It won't work, it's just for display. Use the link above:

Set objFSO = Wscript.CreateObject("Scripting.FileSystemObject") Set objFolder = objFSO.GetFolder("C:\Users\DaCeige\Music\iTunes\iTunes Music") Set colSubFolders = objFolder.Subfolders   'get inside each artist's folder For Each objSubFolder in colSubFolders         'Wscript.Echo objSubFolder.Name         'once inside the folder do the following...         Set colSubSubFolders = objSubFolder.Subfolders         'Get inside each album folder         For Each objSubSubFolder in colSubSubFolders                 'once inside do the following                 'WScript.Echo vbtab & objSubSubFolder.name                 Set colMP3Files = objSubSubFolder.Files                 For Each objMP3File in colMP3Files                         'Wscript.Echo vbtab & objMP3File.Name                         strCurrentMP3Name = objMP3File.Name                         For Each objMP3File2 in colMP3Files                                 'Wscript.Echo Left(strCurrentMP3Name, Len(strCurrentMP3Name)-4) & vbtab & Left(objMP3File2.Name, Len(objMP3File2.Name)-6)                                 If UCase(Left(strCurrentMP3Name,Len(strCurrentMP3Name)-4)) =UCase(Left(objMP3File2.Name, Len(objMP3File2.Name)-6)) Then                                        'Wscript.Echo(UCase(strCurrentMp3Name & vbtab & objMP3File2.Name))                                         'WScript.Echo objMP3File.Size & vbTab & objMP3File2.Size                                         WScript.Echo "1" & vbTab & objMP3File.Size & vbTab & UCase(strCurrentMp3Name)                                         WScript.Echo "2" & vbTab & objMP3File2.Size & vbTab & UCase(objMP3File2.Name)                                         MP3Size1 = objMP3File.Size                                         MP3Size2 = objMP3File2.Size                                         MP3SizeDiff = objMP3File.Size - objMP3File2.Size                                         WScript.Echo "-" & vbTab & MP3SizeDiff                                         If (MP3SizeDiff > -10000) Then                                                 WScript.Echo "*" & vbTab &"DELETE2" & vbTab & objMP3File2.Name                                                 objFSO.DeleteFile(objMP3File2.Path)                                         Else                                                 WScript.Echo "*" & vbTab &"DELETE1" & vbTab & objMP3File.Name                                                 objFSO.DeleteFile(objMP3File.Path)                                                 WScript.Echo "*" & vbTab &"RENAME" & vbTab & objMP3File2.Name & " -> " & strCurrentMP3Name                                                 objMP3File2.Name = strCurrentMP3Name                                         End If                                                                          WScript.Echo " "                                 End If                         Next                 Next         Next Next

Read more:http://www.methodshop.com/gadgets/ipodsupport/duplicates/index.shtml#ixzz1Ar70rLTC